EGI-01. บทความวิชาการ/วิจัย (วารสารระดับนานาชาติ)
URI ถาวรสำหรับคอลเล็กชันนี้
เรียกดู
กำลังเรียกดู EGI-01. บทความวิชาการ/วิจัย (วารสารระดับนานาชาติ) โดย เรื่อง "ferrocement"
ตอนนี้กำลังแสดง1 - 2 ของ 2
ผลลัพธ์ต่อหน้า
ตัวเลือกเรียงลำดับ
รายการ Seismic Shear Strengthening of Reinforced Concrete Short Columns Using Ferrocement with Expanded Metal(Engineering Journal, 2562-11-30) Songkran Panyamul; Phaiboon Panyakapo; Anat RuangrassameeTypical reinforced concrete short column is brittle in shear rather than flexure under lateral cyclic loading due to its shear deficiency. This paper presents the improvement of seismic behaviour of the reinforced concrete short columns which were strengthened by using ferrocement with expanded metal. Full scale experiments were conducted for two strengthened concrete columns with different volume fractions of expanded metal and the control specimen under lateral cyclic loading. It was found that the seismic behaviour in terms of the shear strength, stiffness, displacement ductility, and energy dissipation were significantly improved. The expanded metal mesh with the high specific surface provided the better performance for controlling the crack propagation. The brittle shear failure mode of the stirrup was reduced and the ductile flexure mode of the longitudinal reinforcement was dominant. The reduced shear force of the stirrup was compensated by the shear force of the expanded metal reinforcement which experienced relatively large strain. The technique of steel angle installation at the corners of column can successfully prevent the effect of sharpened corner wrapping of the mesh. A model to predict the shear strength of the strengthened column is presented in term of the global efficiency factor for expanded mental.รายการ Seismic Strengthening of RC Frame and Brick Infill Panel using Ferrocement and Expanded Metal(Engineering Journal, 2563-05-31) Suvawat Longthong; Phaiboon Panyakapo; Anat RuangrassameeThis paper presents the strengthening of reinforced concrete frame and brick infill panel by using ferrocement technique reinforced with expanded metal. Analytical models of the strengthened frame and infill panel were proposed. An experimental study on the strengthened frames was conducted to verify the proposed models. Two control specimens and two strengthened specimens were compared: the bare frame and the infilled frame. Special strengthening techniques were employed to protect against two major failures: the beam and columns of the frame were fully strengthened to prevent shear failure, and the infill panel was protected against corner compression failure. The frames were investigated under constant vertical load and lateral cyclic load. The seismic behavior of the retrofit frames was compared with the control specimens. The strengthened frames showed the significant increase of strength up to 64% and 87%, and the ductility capacity was also improved 77% and 66% for the bare frame and the infilled frame, respectively. The proposed model of strengthening for the frame and infill panel predicted the lateral resistance of the RC infilled frame with a reasonable accuracy when compared to the observed experimental results.